Have you ever looked

inside a tank?

Bio-Micro

Clean Air System For Regulators | 169.00

Special Order Only

Dirty Air When a tank is filled with air, small amounts become liquefied and settle inside the cylinder. Salt, water, rust, silicon residue and aluminum oxide can form inside the tank along with oil and carbon dust.

Patented Apollo Clean Air System
Inline Attaches directly to first stage LP port
Electret Clean Air Filter removes dust, rust and oil mist. Dive tanks can retain small particles of dust rust and oil residue. Inhaling these contaminants can be harmful to your body. Electret clean air cartridge efficiently removes these impurities. Additional Information
Nitrox compatible up to EAN level 40
Shock Absorber A little give does a lot to help prevent damage from mishandling. 1st stage connector features ball joint and damper to absorb external impact. This area will always have some movement even after lock down.
Includes Bio-Micro, Electret Filter x2, Clamp and Allen Wrench
Size 3/8" or 1/2"
Material and Color Powder Coated Brass, Silver
Dimensions 3/8" 32 x 59.5mm, 1/2" 32x74mm
Weight 3/8" 120g, 1/2" 136g
Manufactured Japan

Tech Tips
- 3/8" Suitable for use with most regulators. Check your regulator manual to determine size required.
- Over tightening can damage threads. Review all instructions before attempting to install.
- During installation, lock down 1st stage connector from the inside. This is the most commonly missed step.
- A little give does a lot to help prevent damage from mishandling. 1st stage connector features ball joint and damper to absorb external impact. This area will always have some movement even after lock down.
- Install air filter for all diving or reserve for occasional use. Replace after 50 dives, immediately if discolored or soiled.
Accessories | Parts
- Electret Filter
- O-ring Kits
- Schematic (PDF 120K)
- Manual
Bio-Micro vs. Bio-Filter
- Bio-Micro = clean air only
- Bio-Filter = clean air and moisture
More
- Closeout, Demo and Display (No Items)